Training Record Book guide
The tasks from your onboard training record book, explained: the theory behind each one, where to find the information on board, who to ask, and what the officer checks before signing it off.
- 2874 questions
- 23 national record books
- 1513 for deck cadets
- 1391 for engine cadets
- 635 for ETO cadets
Every task from the national deck, engine and ETO record books, merged into one list without repeats. Pick your book to see its own numbering.
2874 questions
0 of 2874 marked as signed off · Your marks are kept only in this browser.Ship familiarisation & documents265
- Joining, induction and life on board
- Receive the shipboard safety and fire-safety induction and familiarisation training as soon as you join
- Complete the record book ship and safety familiarisation section on arrival, signed off by an officer
- Receive an induction on how your onboard training is organised, with emphasis on safety and the environment
- Read and explain the company fire and safety regulations
- Explain the purpose of the shipboard familiarisation checklist
- State what was new to you when completing the familiarisation checklist
Passage planning & position fixing113
- Charts and chart selection
- Name the types of nautical chart in use: navigational, ENC, RNC, routeing, plotting and instructional charts
- Find and interpret chart information: title block, scale, datum, depths, tidal and current data, notes
- Interpret chart symbols and abbreviations using Chart 5011 / INT 1
- Explain the chart folio system and how the ship's folios are kept
- Use the chart catalogue to identify the charts needed for a passage
- Select the largest-scale, fully corrected charts for the passage from paper folios, ECS or ECDIS
Navigational watch & COLREG174
- Watchkeeping rules and organisation
- Explain the principles of keeping a safe navigational watch under STCW Code A-VIII/2
- Explain the safe watchkeeping principles set out in the ICS Bridge Procedures Guide
- Know the principles and rules for bridge, radio, deck and engine-room watchkeeping on board
- Describe and apply the Danish order on watchkeeping in ships ('bekendtgørelse om vagthold i skibe')
- Explain and practise 'good bridge procedure' on watch
- Complete the supervised bridge watchkeeping required by STCW regulation II/4 in your first months at sea
Radar, ARPA & ECDIS105
- Bridge equipment familiarisation
- Identify the wheelhouse and chartroom navigation instruments and equipment and state the purpose of each
- Report on the navigation aids carried, the role of ECDIS and the plan if ECDIS fails
- Describe safe operation, adjustments, alarms and performance monitoring of each navigation aid per its manual
- Check steering control, bridge communications and all navigation aids before departure
- Operate all the electronic navigation equipment carried and use it to establish the ship's position
- Switch on and set up the other bridge electronic equipment fitted
Communications, GMDSS & signals53
- Communication systems on board
- Identify the ship's internal and external communication systems and alarms and describe their use
- Explain the GMDSS system: sea areas, functional requirements and the equipment that serves them
- Locate and take stock of the SOLAS/GMDSS radio equipment carried and its operating position
- Use hand-held UHF/VHF transceivers to communicate with watch members during safety-related duties
- GMDSS equipment and radio station
- Find and use the manufacturer manuals and instructions for the ship's radio equipment
- Identify the official maritime radio publications carried (ITU lists, ALRS, GMDSS manual) and their use
Seamanship: manoeuvring, anchoring & mooring239
- Ship construction and terminology
- Name the main structural members and parts of the ship and explain their functions
- Use correct nautical terminology when communicating on board
- Show junior-officer knowledge of ship construction, stability, buoyancy, draughts, trim and hull stresses
- Define a frame in ship structure
- Define longitudinal framing and where it is used
- Define transverse framing and where it is used
Cargo handling & stability261
- Codes and safety guides
- Read and understand the oil tanker safety guides, in particular ISGOTT, and the ship's cargo manuals
- Read and understand the regulations and safety guides for chemical tankers (IBC Code, ICS Chemical Tanker Guide)
- Read and understand the regulations and safety guides for gas carriers (IGC Code, ICS Liquefied Gas Guide)
- Read and understand the regulations and codes of safe practice for bulk carriers (SOLAS XII, BLU Code, IMSBC Code)
- Read and understand the International Grain Code and the ship's grain loading information
- Read and understand the structure and requirements of the IMDG Code
Engineering watch93
- Watch organisation and requirements
- Describe how the engine-room watch is organised on your ship
- Explain the principles of a safe engineering watch: managing duties, supervision and safe plant operation
- Explain engine watch requirements in normal operation, manoeuvring, anchorage, pilotage and reduced visibility
- State the points to observe when keeping an engine-room watch at sea and in port
- State what deck officers expect from engineer officers during the watch and after the voyage
- State in the voyage plan when the engine room is manned and when unmanned
Main & auxiliary machinery203
- Engine room and propulsion overview
- Explain the structure, main components, purpose, operation and maintenance of the larger machinery on board
- Show in a diagram the arrangement of main engines and auxiliary machinery in the engine room
- Describe the auxiliary units: turbocharger, air compressor, purifiers, boilers, FW generator, steering gear, pumps, refrigeration, thrusters, deck machinery
- Explain safe operation of boilers, compressors, auxiliary engines, fresh water generators and oil purifiers
- Describe the working principles of the heat exchangers on board
- Know thermal machinery well enough to run engine, steam, combustion and cooling plants reliably, economically and cleanly
Fuel, lube, bilge & pumping systems166
- Piping diagrams and symbols
- Use the ship's piping diagrams to trace a system and identify its components
- Explain the purpose of a chosen engine-room system and the function of each of its components
- Sketch a chosen engine-room system with its pumps, valves, heat exchangers and connections to other systems
- Draw line diagrams of all the piping systems on board
- Explain the piping arrangements of the propulsion machinery and how the systems interrelate in normal operation
- Draw a block schematic of the main engine system showing its main components
Electrical, electronic & control systems140
- Electrical diagrams and symbols
- Explain the difference between a system diagram, a circuit diagram and a wiring diagram
- Interpret accurately the information in system, circuit and wiring diagrams
- Explain the symbols commonly used on electrical circuit diagrams
- Use ship's diagrams to identify breakers, emergency switchboard links, trips, transformers, fuses, voltages, shore connection and motors
- List up to five items of shipboard equipment for which you used the manuals and diagrams
- Power generation and distribution system
- Explain the ship's power supply (generators, main switchboard, consumers) and its dangers
Maintenance, repair & emergencies244
- Planned maintenance and documentation
- Explain the ship's planned maintenance system (PMS), its purpose and how you use it
- State what a planned maintenance system must contain to meet ISM Code section 10
- Enter completed maintenance jobs into the ship's planned maintenance system
- Complete planned maintenance system records in English
- Retrieve job and history reports from the computer-based maintenance system
- Use manufacturer's instructions and drawings to inspect and maintain equipment
Power generation, high voltage & power electronics59
- Switchboards and distribution
- Describe the ship's electrical generation and distribution system and its configuration
- Explain the construction, operation and maintenance of the main and emergency switchboards
- Draw a line diagram of the main switchboard and explain the function of each section
- Explain the MSB voltmeter, ammeter, wattmeter, synchroscope, power factor meter, earth meter and their selector switches
- Use the generator start/stop controls on the main switchboard
- Read and record the main switchboard parameters and operating modes
Automation, bridge & communication electronics120
- Control room familiarisation and monitoring
- Use the ECR control console manuals and drawings; read and interpret the monitored parameters
- Check that the control console indicating lights are operational (lamp test)
- Check that the alarm and monitoring data logger is operational
- Use the boiler control panel documentation; read and interpret its parameters and operating modes
- Use the separator control panel documentation; read and interpret its parameters and operating modes
- Use the air compressor control panel documentation; read and interpret its parameters and operating modes
Fault-finding, hazardous areas & electrical maintenance86
- Electrical safety and hazardous areas
- Identify the hazardous zones on board and the certified electrical equipment permitted in each
- State the special precautions for maintaining and testing electrical equipment in hazardous areas
- Explain switchboard instrumentation and the safe working practices for switchboard maintenance
- Dismantle and reassemble one item of hazardous-area (Ex) equipment
- Planned maintenance, records and drawings
- Explain the ship's planned maintenance system and what it must contain
- Enter maintenance data into a card-index planned maintenance system
Safety, fire-fighting & life-saving324
- Safety familiarisation and alarms
- Communicate with others on board about elementary safety matters
- Recognise and explain the safety information symbols, signs and alarm signals used on board
- State what to do if you see a person fall overboard
- State what to do if you detect fire or smoke
- State what to do when the fire or abandon ship alarm sounds
- Identify your muster and embarkation stations and the emergency escape routes
Pollution prevention119
- MARPOL rules and pollution documents
- Explain that MARPOL protects both the sea and the air and how its Annexes divide this
- Outline MARPOL and its six Annexes: which pollutant each controls and its main requirements
- Investigate and list the MARPOL and other international regulations that protect the marine environment
- Find on board the international, flag State and company pollution regulations, documents and plans
- State where and to which ships MARPOL applies and which ships are exempted
- Identify the optional MARPOL Annexes and which Annexes the flag State has ratified
Legislation, ISM, security & teamwork110
- Laws, conventions and documents on board
- Locate the ship's copy of SOLAS on board
- Locate the ship's copy of MARPOL on board
- Locate the Garbage Record Book on board
- Locate the certificates issued under SOLAS, MARPOL, Load Line, STCW and MLC
- State where ship-operation and pollution regulations are kept and which bodies to contact
- Use the relevant legislation to decide the correct approach to an onboard operational question
Getting your record book signed
Plan with your training officer
In the first days on board, go through the book with the designated shipboard training officer and agree which tasks fit this voyage, this ship type and this trade.
Learn it before you do it
Read the theory and find the documents first. Then do the task under supervision, more than once if needed, until you can explain and repeat it on your own.
Ask for the signature at the right time
An officer signs when you have shown the competence, not for attendance. Keep the book up to date every week; a pile of tasks signed on the last day is easy to spot.
The task list was compiled from published deck, engine and ETO cadet record books of more than a dozen maritime administrations and academies, and from the STCW Code. Common tasks were merged and grouped by STCW function. The explanations are written by SMART NAV TOOLS. Your book may number and word its tasks differently.